Wrap Caps Offer Better Holding Power And Protection
Choose the recommended fastening method as part of a complete commercial building envelope system with Tyvek® air and water barriers.
DuPont™ Tyvek® Wrap Caps provide optimal holding power when securing DuPont™ Tyvek® weather barriers in commercial buildings. Used with full drill point steel stud screws, DuPont™ Tyvek® Wrap Caps provide additional protection around fastener penetrations.
They are ideal for high wind load installations, where they can help prevent tear-off and keep Tyvek® weather barriers from tearing off while they are exposed during construction.
How It Works
Two-inch diameter DuPont™ Tyvek® Wrap Caps are constructed of high-density polyethylene with UV inhibitors. These caps are engineered to increase fastener holding power, reducing the potential for job-site tear-offs.
Use 1 ¾-inch steel stud screws, which are self-tapping drill-point screws that can be easily applied by hand or with a drill. Screws are core-attached to DuPont™ Tyvek® Wrap Caps for quick installation.
Durable And Sustainable
When used as part of the DuPont Building Envelope Systems, DuPont™ Tyvek® Wrap Caps help contribute towards U.S. Green Building Council LEED® points.
Support Throughout The Building Process
Tyvek® Wrap Caps are part of DuPont Building Envelope Systems, and are backed by support from the DuPont™ Tyvek® Specialist Network, a group of highly-trained field representatives who focus specifically on commercial building applications, and are available to assist with installations.
From the latest updates on building codes to on-site consulting and training on DuPont weatherization products, a local DuPont™ Tyvek® Specialist can help make sure the job gets done right.
Additional Information (8)
- Architectural Binder: DuPont Tyvek®
- CAD: Commercial Technical Drawings PDF
- CAD: Commercial Technical Drawings DWG
INFORMATION & IDEAS
Commercial Specifications Resource Center
The following information is being provided as a resource for more information about the DuPont products listed in Product MasterSpec Section 072500 Weather Barriers and Section 072726 Fluid Applied.
- NFPA 285 Compliance
- LEED® Certified Building
- Wall Sheathing Comparison
- Understanding Vapor Permeability
- Sustainable Buildings
- Protecting The R-Value Of Insulation
Protecting Foam Sheathing
Tyvek® weather barriers are a must to protect wall systems that include exterior foam sheathing from air and water infiltration.
- Sustainable Building Products
- Design Without Compromise: Balancing Durable And Energy-Efficient Buildings
- Controlling Air Leakage
- Commercial Building Envelope Design
USES AND APPLICATIONS
Tyvek® Air and Water Barriers for Multifamily Construction
DuPont products such as Tyvek® CommercialWrap®, Tyvek® Fluid Applied WB+™ and Tyvek® HomeWrap® provide a wide range of air, water and thermal management options for protecting multifamily buildings from duplexes to high-rise apartments.