MECS® OCAP™ Non-Welded Heat Exchanger
Our modular Open Channel Air Preheater (OCAP™) — like all MECS® heat exchangers — offers one of the most efficient and reliable heat recovery and air preheating solutions available for refinery, chemical, power and other industrial plants worldwide.
OCAP™ is a non-welded heat exchanger that increases the overall thermal efficiency of plant applications by recovering heat from hot gas streams, which may otherwise be stack-vented to atmosphere. The recovered heat from one gas stream is used to heat or preheat another, preparing it for use in other processes. Energy efficiency is optimized, yielding valuable process savings and boosting the cost-effectiveness of the plant.
MECS® acquired the OCAP™ Non-Welded Heat Exchanger technology from North Atlantic Technologies (NAT) in 1999. We are happy to provide quotations for new applications in addition to MECS/NAT replacement units. Backed by our extensive work with clients in the fertilizer, refining, non-ferrous metals, general chemicals, and coal gasification industries, dedicated MECS® engineers can custom-design and furnish an OCAP™ solution to meet your application needs, yielding optimum performance and energy efficiency.
A Modular Design for Optimal Flexibility
All MECS® gas-to-gas heat exchangers — including OCAP™ air preheaters — feature a compact, modular design and long service life. The units are shop-fabricated to ensure quality, and trucked as individual blocks or complete modules. With their compact size and weight, installation and field setup are much simpler than with conventional heat exchangers. The OCAP™ Non-Welded Heat Exchanger is available in both cross-flow and counter-flow configurations. Our modular approach enables us to offer one of the most flexible and efficient flow arrangements available, as well as the freedom to select appropriate materials of construction for each heat transfer zone. This modular approach also allows the unit to easily be expanded to accommodate future increases in capacity.
Unique Design Features and Distinct Advantages
The OCAP™ Non-Welded Heat Exchanger features a non-welded, "floating" plate pack contained within a rigid housing. This design permits thermal expansion and contraction with minimal stress on the unit’s components, to handle cycling applications with ease. A patented compression strip assembly provides a tight metal-to-metal seal. This design reduces stress and extends the life of the OCAP™ unit. Our uniquely constructed plates are nested together with directional ribs providing support throughout the plate pack to form the OCAP™ gas flow passages.
The OCAP™ Non-Welded Heat Exchanger design offers additional advantages over conventional exchangers:
- Generous plate clearances allow for ease of inspection
- Ability to inspect and clean both sides of the exchanger
- No tubes to vibrate or to cause acoustic resonance
- Floating plate pack to handle differential thermal expansion
- Rigid heavy-duty frame assembly for long service life
- Material "mix-and-match" construction
- High efficiency
Cold End Insulator™ Technology to Prevent Condensation
In certain cases, where the flue gas contains a significant amount of sulfur, the first pass (the "cold end" of the preheater) can be constructed to contain our proprietary Cold End Insulator™ (CEI) technology. This increases the heat transfer plate metal temperature in the cold corner of the air preheater, resulting in a condensation-free operation of the OCAP™ Non-Welded Heat Exchanger.
Our OCAP™ units provide reliability and durability in even the most difficult applications:
- Fired heaters
- Fume incineration
- Gas coolers
- Air preheating
INFORMATION & IDEAS
Read the product and offering brochure to learn more about the features and benefits of using our ZeCor® Alloy packing support system.
Read the short brochure to learn more about the application, features and benefits of using our DynaWave® Reverse Jet Scrubbers.
To get more information on improving removal efficiency and protection against corrosion in cement kilns, please read the full bulletin on DynaWave® wet gas scrubber applications.
Read the DuPont Sustainable Solutions (DSS) ZeCor® technical bulletin to learn more about our ZeCor® Alloy corrosion-resistant and high-performance metal.
Download the MECS® engineered alloy products technical bulletin to get more information on the benefits and uses of our innovative FilmGARD®-5 Anodic Protection System offering.
MECS® ZeCor®-Z piping systems set the leading standard on prevention of leaks. The ultra-low corrosion rate of ZeCor-Z results in reduced maintenance costs. Read the brochure to learn more.
USES AND APPLICATIONS
Discover how our mist elimination systems meet emission regulations in fuming acid, organic, asphalt and metalworking mist and oil smoke applications.
See how TowerGARD® Mesh Pads from MECS® yield 50% turndown ratios or higher for sulfuric acid plants, significantly boosting corrosion resistance.
DUPONT PRODUCTS & SERVICES
We combine our technical expertise and owner/operator experience with our world-class safety culture to deliver a high-impact training program for your operators and engineers. By leveraging the power of DuPont’s high-fidelity dynamic process simulators students learn valuable troubleshooting and response skills in a realistic environment that models “cause and effect” relationships across the entire.