Kapton® corona resistant film withstands the damaging effects of corona discharge
The corona resistance provides improved service life and operational efficiencies versus conventional insulation materials.
Kapton® 100CRC polyimide film is a homogeneous film possessing improved resistance versus traditional polyimide films when exposed to the damaging effects of coronal partial discharge. In addition to the corona resistant properties, Kapton® CRC offers excellent, physical, electrical, thermal and chemical resistant characteristics expected with Kapton® polyimide films.
Kapton® CRC polyimide film has been developed for use as an electrically insulating material for high voltage environments where the potential for corona discharge is present. Kapton® CRC is typically used in industrial motor and generator applications as magnet wire, turn to turn strand, coil, slot liner and ground insulation materials. It has also been used to form laminates with other materials, such as DuPont™ Nomex® paper or mica insulations, to provide a tailored electrical insulation property.
• AC Inverter Duty Motors
• Rail, Automotive Traction Motors
• Hydro, Wind Power Generators
|property||Unit||Typical Value||Test Method|
|Tensile Strength||kpsi||34||ASTM D-882|
|Tensile Modulus||kpsi||500||ASTM D-882|
For complete information on Kapton® 100CRC, please view data sheet.
Product Data Sheets (1)
RELATED DUPONT PRODUCTS & SERVICES
DuPont™ Kapton® B polyimide film exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range, with superior dimensional stability at elevated temperatures.
DuPont™ Kapton® FN is a general purpose HN film that is coated or laminated on one or both sides with Teflon® FEP fluoropolymer.
Kapton® HN is the recommended choice for applications that require an all-polyimide film with an excellent balance of properties over a wide range of temperatures.
Kapton® FCRC combines corona resistant polyimide film with a heat fusible FEP fluoropolymer film. The corona resistance provides improved service life and operational efficiencies vs conventional insulation materials.
Kapton® PV9100 Series
Kapton® polyimide film is widely used as a dielectric substrate for its high temperature resistance, self extinguishing burn characteristics, toughness and flexibility.
- Kapton® MT
DuPont Kapton® CR polyimide film was developed specifically to withstand the damaging effects of “corona,” which can cause ionization and eventual breakdown of an insulation material or system when the voltage stress reaches a critical level.
Kapton® FCR is a state-of-the-art wire insulation that will withstand corona discharge while delivering improved long term performance, cost effectively.
DuPont™ Kapton® FPC polyimide film is treated on both sides with excellent balance of physical, chemical and electrical properties over a wide temperature range.
In applications where low shrinkage and superior adhesion are important, Kapton® HPP-ST is the polyimide film of choice.
Kapton® GS film has been specifically designed and manufactured to expand the processing window and improve yields during artificial graphite sheet production.
- Kapton® RS