Kapton® HPP-ST where low shrinkage and superior adhesion are important
DuPont™ Kapton® HPP-ST is a two-sided, treated film that offers the same excellent balance of physical, chemical, and electrical properties over a wide temperature range offered by general purpose Kapton® HN.
Additionally, this high performance film has superior dimensional stability and excellent adhesion with most adhesion systems. Adhesion data for HPP-ST can be referenced in the adhesion to Kapton® technical bulletin.
In applications where low shrinkage and superior adhesion are important, Kapton® HPP-ST is the polyimide film of choice.
- Electronic parts
- PCB stencils
- Screen printing
- Insulation tubing
|property||1 mil||2 mil||3 mil||5 mil|
|Coefficient of Thermal Expansion, ppm/°C||20||20||20||20|
|Dielectric Strength, V/mil||7,700||6,100||5,200||3,900|
For complete infromation on Kapton® HPP-ST, view data sheet.
Product Data Sheets (1)
Kapton® label stocks endure the most hostile environments without overlamination.
RELATED DUPONT PRODUCTS & SERVICES
DuPont™ Kapton® MT polyimide film is a homogeneous film possessing 3x the thermal conductivity and cut through strength of standard Kapton® HN.
Kapton® polyimide film is widely used as a dielectric substrate for its high temperature resistance, self extinguishing burn characteristics, toughness and flexibility.
Kapton® FCRC combines corona resistant polyimide film with a heat fusible FEP fluoropolymer film. The corona resistance provides improved service life and operational efficiencies vs conventional insulation materials.
Kapton® corona resistant film withstands the damaging effects of corona discharge. The corona resistance provides improved service life and operational efficiencies versus conventional insulation materials.
Kapton® HN is the recommended choice for applications that require an all-polyimide film with an excellent balance of properties over a wide range of temperatures.
DuPont™ Kapton® FN is a general purpose HN film that is coated or laminated on one or both sides with Teflon® FEP fluoropolymer.
DuPont™ Kapton® B polyimide film exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range, with superior dimensional stability at elevated temperatures.
Kapton® GS film has been specifically designed and manufactured to expand the processing window and improve yields during artificial graphite sheet production.
DuPont™ Kapton® FPC polyimide film is treated on both sides with excellent balance of physical, chemical and electrical properties over a wide temperature range.
Kapton® FCR is a state-of-the-art wire insulation that will withstand corona discharge while delivering improved long term performance, cost effectively.
DuPont Kapton® CR polyimide film was developed specifically to withstand the damaging effects of “corona,” which can cause ionization and eventual breakdown of an insulation material or system when the voltage stress reaches a critical level.
Kapton® RS is an electrically conductive polyimide film developed for applications in which a precisely controlled surface resistivity is needed.