Kapton® PST crystalline polyimide film designed for the pressure sensitive tape industry
Kapton® PST is a tough film that exhibits an excellent balance of physical, chemical and electrical properties over a wide temperature range, particularly at unusually high temperatures.
DuPont™ Kapton® PST grade polyimide film is a crystalline film designed for the pressure sensitive tape industry with improved film attributes for PST coaters. Film properties that aid in coater performance include superior point thickness and gauge control across the web, improved roll formation, and extended roll lengths. The film is available in 50, 100, 200, 300 and 500 gauges.
- Superior tensile strength
- Good elongation
- Minimal variation between MD and TD properties
- Superior dielectric
- UL listing
- Long length splice-free rolls
- Batch-to-batch uniformity
|property||50 PST||100 PST||200 PST||300 PST||500 PST||test Method|
AC volt/mil (kV/mm) Minimum
|6,000 (118)||6.700 (236)||5,300 (197)||4,800 (177)||3,500 (118)||ASTM D-149-81|
Ω-cm at 200oC Minimum
|Dielectric Constant at 1 kHz Maximum||4.0||3.9||3.9||3.9||3.9||ASTM D-150-81|
|Dissipation Factor at 1 kHz Maximum||0.0050||0.0036||0.0036||0.0036||0.0036||ASTM D-150-81|
For complete information on Kapton® PST, view data sheet.
Product Data Sheets (1)
- Kapton® for Aircraft Thermal/Acoustic Insulation Systems
- DuPont Materials Enables Advanced Technology in Hypothermia Prevention
- Kapton® EN Chosen for L’Garde Solar Sail
- Kapton FN for Winding Wire Insulation Systems in Eurotram Engines
- Kapton® for Traction Motors - 100 Million Km and Still Going
Bar Code Labels of DuPont™ Kapton®
Kapton® label stocks endure the most hostile environments without overlamination.
RELATED DUPONT PRODUCTS & SERVICES
DuPont™ Kapton® FN is a general purpose HN film that is coated or laminated on one or both sides with Teflon® FEP fluoropolymer.
Kapton® corona resistant film withstands the damaging effects of corona discharge. The corona resistance provides improved service life and operational efficiencies versus conventional insulation materials.
DuPont™ Kapton® B polyimide film exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range, with superior dimensional stability at elevated temperatures.
Kapton® FCRC combines corona resistant polyimide film with a heat fusible FEP fluoropolymer film. The corona resistance provides improved service life and operational efficiencies vs conventional insulation materials.
Kapton® PV9100 Series
Kapton® polyimide film is widely used as a dielectric substrate for its high temperature resistance, self extinguishing burn characteristics, toughness and flexibility.
DuPont™ Kapton® MT polyimide film is a homogeneous film possessing 3x the thermal conductivity and cut through strength of standard Kapton® HN.
Kapton® HN is the recommended choice for applications that require an all-polyimide film with an excellent balance of properties over a wide range of temperatures.
Kapton® GS film has been specifically designed and manufactured to expand the processing window and improve yields during artificial graphite sheet production.
In applications where low shrinkage and superior adhesion are important, Kapton® HPP-ST is the polyimide film of choice.
DuPont™ Kapton® FPC polyimide film is treated on both sides with excellent balance of physical, chemical and electrical properties over a wide temperature range.
Kapton® FCR is a state-of-the-art wire insulation that will withstand corona discharge while delivering improved long term performance, cost effectively.
DuPont Kapton® CR polyimide film was developed specifically to withstand the damaging effects of “corona,” which can cause ionization and eventual breakdown of an insulation material or system when the voltage stress reaches a critical level.