Quick Entry of NaCl concentration only
To enter a feed water stream containing only Na and Cl, the Quick Entry methods described below should be followed.
- In the ‘Feed setup’ tab put an appropriate value of Total Dissolved Solids in the “mg/L NaCl“ field
-
Click on the “mg/L NaCl“ button. This populates Na and Cl entries
Figure 1: Quick entry of NaCl composition
Notes:
- The water composition entered through the Quick Entry method is always charge balanced.
- Using the Quick Entry method immediately clears the Cations, Anions and Neutrals tables.
- In WAVE, one can clear all the cells by putting in “0 mg/L” in the Quick Entry field.