Fortasun™ selector tool
Find the product that meets your needs.
Make a selection
Application
Parts
Working time
Region
CHOOSE FROM THESE AVAILABLE OPTIONS
Available products
PV 8030
PV 8300/8301
PV 8300/8303
PV 804
PV 8080
PV 8007
PV 8107
PV 8101F
PV Instant Seal
PV 7326
PV 7321
PV 7030R
PV 7010
PV 6212
PV 5802
Sorry, there are currently no products that match your selected options.
PV 8030
- Adhesion to typical PV substrates
- Protects against mechanical shock and thermal cycling stress at components
- Cure system: Moisture cure
- Mix ratio/by weight: 1-part
- Color: White and black
- Extrusion rate: 110 g/minute
- Specific gravity mixed parts: 1.34 g/cm3
PV 8300/8301
- Adhesion to typical PV substrates
- Fast cure allowing increased production rates
- Two-part product providing customized cure rate using Fortasun™ PV-8300 Base
- Cure system: Condensation cure
- Mix ratio/by weight: 2-part base; catalyst 7:1
- Color: Black
- Extrusion rate: 190 g/minute
- Specific gravity mixed parts: 1.31 g/cm3
PV 8300/8303
- Adhesion to typical PV substrates
- Ultra-fast cure for fully automated processes
- Two-part product providing customized cure rate using Fortasun™ PV-8300 Base
- Cure system: Condensation cure
- Mix ratio/by weight: 2-part base; catalyst 7:1
- Color: Black
- Extrusion rate: 190 g/minute
- Specific gravity mixed parts: 1.31 g/cm3
PV 804
- Proven solution in PV industry
- Adhesion to typical PV substrates
- Protects against mechanical shock and thermal cycling stress at components
- Cure system: Moisture cure
- Mix ratio/by weight: 1-part
- Color: White and black
- Extrusion rate: 190 g/minute
- Specific gravity mixed parts: 1.4 g/cm3
PV 8080
- Adhesion to typical PV substrates
- Protects against mechanical shock and thermal cycling stress
- High-performance with high elasticity after cure
- Cure system: Moisture cure
- Mix ratio/by weight: 1-part
- Color: White and bright white
- Extrusion rate: 197 g/minute
- Specific gravity mixed parts: 1.51 g/cm3
PV 8007
- High-performance silicone adhesive/sealant with fast green strength
- High elasticity after cure allows flexibility in harsh conditions
- Adhesion to typical PV substrates • Protects against mechanical shock and thermal cycling stress
- Cure system: Moisture cure
- Mix ratio/by weight: 1-part
- Color: White and black
- Extrusion rate: 170 g/minute
- Specific gravity mixed parts: 1.56 g/cm3
PV 8107
- High-performance silicone adhesive/sealant with fast green strength
- High elasticity after cure allows flexibility in harsh conditions • Adhesion to typical PV substrates
- Protects against mechanical shock and thermal cycling stress
- Cure system: Moisture cure
- Mix ratio/by weight: 1-part
- Color: White
- Extrusion rate: 175 g/minute
- Specific gravity mixed parts: 1.4 g/cm3
PV 8101F
- Adhesion to typical PV substrates
- Fast tack-free time
- Flexible rubber
- Fast, deep section cure
- Cure system: Moisture cure
- Mix ratio/by weight: 1-part
- Color: White and black
- Extrusion rate: 210 g/minute
- Specific gravity mixed parts: 1.41 g/cm3
PV Instant Seal
- Adhesion to typical PV substrates
- Safe to handle – nonhazardous composition and byproducts
- Clear product improves module aesthetics
- Cure system: Moisture cure
- Mix ratio/by weight: 1-part
- Color: Clear
- Viscosity: 200,000 cPs at application temperature
- Specific gravity mixed parts: 1.06 g/cm3
PV 7326
- High thermal conductivity
- Flame resistance V0 level
- Cure system: Condensation cure
- Mix ratio/by weight: 6:1
- Color: White and black
- Viscosity: Mixed: 3,300 cPs
- Specific gravity mixed parts: 1.48 g/cm3
PV 7321
- Proven solution in PV industry
- Good thermal conductivity
- Excellent dielectric properties
- Cure system: Condensation cure
- Mix ratio/by weight: 10:1; 2-part
- Color: White
- Viscosity: Mixed: 8,000 cPs
- Specific gravity mixed parts: 1.25 g/cm3
PV 7030R
- Fast room temperature or heat cure
- Thick section cure
- No solvents or cure byproducts
- Minimal shrinkage
- Cure system: Addition cure
- Mix ratio/by weight: 1:1; 2-part
- Color: Black
- Viscosity: Part A 2,835 cPs, Part B 2,733 cPs
- Specific gravity mixed parts: 1.2 g/cm3
PV 7010
- Proven solution in PV industry
- Fast room temperature or heat cure
- Thick section cure
- No solvents or cure byproducts
- Translucent material
- Minimal shrinkage
- Cure system: Addition cure
- Mix ratio/by weight: 1:1; 2-part
- Color: Translucent blue and green
- Viscosity: Part A 0.425 Pa.s, 425 cPs, Part B 0.4 Pa.s 400 cPs
- Specific gravity mixed parts: 0.98 g/cm3
PV 6212
- High optical transmission
- UV transparent to 250 nm
- Adhesion to glass, PET-based PV back-sheet and solar cells
- Inherently UV stable
- Excellent humidity resistance
- Superior electrical insulation
- Fast heat cure (100 °C)
- PID resistant
- Cure system: Addition cure
- Mix ratio/by weight: 1:1; 2-part
- Color: Transparent/translucent
- Viscosity: Part A 53.2 95 Pa.s, 53,200 cPs, Part B 51.6 Pa.s, 51,600 cPs
- Specific gravity mixed parts: 0.97 g/cm3
PV 5802
- Electrical and mechanical bonding for back-contact module
- Stencil printing for automatic module assembling process
- Curing profile matches typical lamination
- Low CTM (cell-to-module) power loss
- Superior stability and durability
- Low material consumption
- Cure system: Addition cure
- Mix ratio/by weight: 1-part
- Color: Grey
- Viscosity: 95 Pa.s, 95,000 cPs
- Specific gravity mixed parts: 3.95 g/cm3