Thrust reversal is the temporary diversion of an engine’s exhaust so that it is directed forward rather than backwards. It helps slow down the aircraft just after touch-down, reducing wear on the brakes and enabling shorter landing distances. Translating cowl doors are opened and closed by moving sliders inside Vespel® ASB-0664 channels inserted into the nacelle’s beam. Smooth translation and low coefficient of friction is required, as well as low wear of the channels during the engine’s life.
Features and Benefits
Vespel® ASB-0664 has extensive use in nacelles and has proven itself over many years of service. Wear testing conducted over a variety of test conditions has demonstrated a part life of 80,000+ cycles, depending on specific application requirements.
PTFE fibers enhance friction performance, dropping the dynamic coefficient of friction below 0.20. Higher loads only improve frictional behavior (Figure 1).
Parts can bear the typical high loading conditions of the landing as well as the severe conditions of potential Rejected Take-Offs (RTOs).
Corrosion and chemical resistance
The aluminum is heat treated to provide necessary hardness and stiffness. Anodizing protects the track liner from corrosion, while the fabric creates an insulating barrier between mating metal surfaces. Utilization of PTFE fibers provides parts that are resistant to most fluids used in aircraft operation and maintenance.
The track liners in aluminum, like the sliders into the aluminum beams, allow weight savings for the nacelle.
Assembly and maintenance
The channel can be easily assembled into the aluminum beams. Customized attachment features can be added through additional machining or incorporation of attachment features. Channels can easily be removed and replaced if required.