DuPont™ Tyvek® IntegrationWrap™

A Durable Membrane to Integrate Weatherization Components at Rough Openings

tyvek-integrationwrap-product-logo-image1.jpg
tyvek-integrationwrap-product-logo-image2.jpg
tyvek-integrationwrap-product-logo-image3.jpg
tyvek-integrationwrap-product-logo-image4.jpg

DuPont™ Tyvek® IntegrationWrap™

A Durable Membrane to Integrate Weatherization Components at Rough Openings

<br><b>DuPont™ Tyvek® IntegrationWrap™</b> is a coated woven polypropylene membrane that connects or “integrates” DuPont Self-Adhered Flashing Products at the window/door with the DuPont™ Tyvek® WRB on the wall in single-family residential and wood-framed multi-family/light commercial construction. This flashing integration membrane helps provide an easy means of preparing rough openings prior to the installation of the primary Tyvek® WRB, which can help reduce building dry-in times and facilitate the sequence of trades during the construction process.
 
 
 
 
 
 

Features & Benefits 

 
 
 
 
 
 

Specifications

 
 
 

Standard Sizes

Unit Width Length Units per Case Cases per Pallet Units per Pallet
Roll 9 in. 300 ft. 16 8 128
 
 
 

Testing

<b>DuPont™ Tyvek® IntegrationWrap™</b> exhibits physical properties as indicated below when tested as represented. Review all instructions and (Material) Safety Data Sheet ((M)SDS) before use. Please contact DuPont at 1-833-338-7668 when additional guidance is required for writing specifications that include this product.

TEST METHOD TEST TITLE PROPERTY RESULTS
STRENGTH
ASTM D1777 Standard Test Method for Thickness of Textile Materials Thickness 7 mil
ASTM F1306 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates Puncture Resistance 20 lbf
ASTM D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting Tensile Strength 60/67 MD/CD, lbf
ASTM D5034 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) Tensile Strength 95/126 MD/CD, lbf
ASTM D4533 Standard Test Method for Trapezoid Tearing Strength of Geotextiles Tear Resistance 22/37 MD/CD, lbf
AIR
TAPPI T-460 Air resistance of paper (Gurley method), Test Method Material Air Resistance > 10,000 sec/100 cc
ASTM E1677 Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls Assembly Air Leakage < 0.04 cfm/ft2
(0.2 L/s • m2)
WATER
ASTM E96 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials Water Vapor Transmission Method A (Dry Cup) & Method B (Wet Cup) < 1 perms
ASTM E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference Assembly Water Resistance 300 Pa
6.24 psf
AATCC 127 Test Method for Water Resistance: Hydrostatic Pressure Material Water Resistance (Dynamic Method) > 500 cm water column
AATCC 127 Test Method for Water Resistance: Hydrostatic Pressure Hydrostatic Head Pressure (Static Method) PASS
55 cm for 24 hours
GENERAL
ASTM G154 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Non-Metallic Materials Ultra-Violet Light (UV) Exposure Limit 120 days
AAMA 712 Voluntary Specification for Mechanically Attached Flexible Flashing Passes full AAMA 712 PASS

Note:- *Tyvek® IntegrationWrap™ tested in a wall assembly containing a window. In accordance with the DuPont™ Tyvek® IntegrationWrap™ Installation Guidelines, DuPont Self-Adhered Flashing Products were used to flash window to Tyvek® IntegrationWrap™, with Tyvek® IntegrationWrap™ sealed to Tyvek® WRB on the wall using DuPont™ Tyvek® Tape.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

FAQ

Is DuPont™ IntegrationWrap™ satisfy AAMA 711?
No, AAMA 711 Specification for Self-Adhering Flashing Used for Installation of Exterior Wall Fenestration Products is intended for self-adhered flashing products. IntegrationWrap™ is a mechanically-attached flashing that meets AAMA 712 Specification for Mechanically-Attached Flexible Flashing.
What applications can DuPont™ IntegrationWrap™ be used?
IntegrationWrap™ can be used as flashing integration membrane to prepare rough openings prior to the DuPont™ Tyvek® WRB installation for walls with or without sheathing.
What is the roll size of DuPont™ IntegrationWrap™?
IntegrationWrap™ is available in 9' x 300' rolls.
 
 
 
 
 
 

How can we help you?