NLGI Grade 3, translucent light gray, used primarily for insulators and high current switches given it has the highest dielectric strength.

Applications where improved metal-to-metal lubricity (compared to other MOLYKOTE® brand silicone compounds) is needed. To help prevent arcing and flashovers on insulators and bushings. As a contact Lubricant on high-voltage equipment. To lubricate static and dynamic O-ring seals in hot-melt adhesive equipment. To help prevent rust and corrosion on insulator threads and bolts; also helps in removal of insulators and hardware for replacement. As a water-repellent filling material to help prevent moisture from traveling inside the rubber jacket of service entrance cable (can be injected using a Grease gun with a needle-type nozzle). To help prevent oxidation and corrosion on contacts and band-tightening screws of socket-type watt-hour meters.

• Electrical
• Valves, packings, seals & O-rings

• Nonconductive
• Water-repellent
• Long-lasting
• Easy to apply
• Helps prevent formation of conductive paths

• Dielectric
• Good corrosion protection
• Good oxidation resistance
• Good water resistance
• High temperature performance
• Low temperature performance
• Wide temperature range

No intentional polytetrafluoroethylene (PTFE) or per- and polyfluoroalkyl substances (PFAS)