DuPont™ Thermax™ Light Duty Foam Insulation

 
 
 
Commercial | Residential | Multifamily | Wall

Designed for easy installation and continuous insulation

Equipped with a fiberglass-reinforced foam core, Thermax™ Light Duty Insulation combines long-term thermal resistance with facers that prevent water and water vapor intrusion.

 
 
 
 
 
 

DuPont™ Thermax™ Light Duty Foam Insulation

Thermax™ Heavy Duty Insulation* is designed as an insulation and interior finish system for walls and ceilings in metal, wood post frame, and concrete or masonry buildings, as governed by building codes. Thermax™ Heavy Duty consists of a glass-fiber-reinforced polyisocyanurate foam core faced with nominal 4 mil embossed white thermoset-coated aluminum on one side and 1.25 mil embossed aluminum on the other. The tough 4 mil white embossed aluminum surface makes it a durable insulation/finish choice for use in moderate-impact areas, and it can be pressure washed up to 2,000 psi with a 15-degree or greater spray tip (at 3’ minimum distance). Thermax™ Heavy Duty also offers high, long-term thermal resistance, with facers that help prevent water and water vapor intrusion into the insulation foam allowing it to stabilize at a higher R-value*. Used in conjunction with the appropriate joint closure system for the application, Thermax™ Heavy Duty – with its low perm rating – can help to reduce moisture condensation within and behind the insulation.

* Thermax™ Heavy Duty Insulation is a former product of The Dow Chemical Company

 
 
 

Features & benefits

Feature Benefit
Easy to cut, handle, and install
  • Easy to use
  • Moisture Resistant
  • Reduces the potential for condensation within the wall assembly
  •  
     
     

    Physical properties

    Method Unit Value
    Compressive Strength1 ASTM D1621 psi, min. 25
    Water Absorption ASTM C209 % by volume, max. 0.1
    Water Vapor Permeance ASTM E96 perm, max <0.03
    Maximum Use Temperature - °F 250
    Flexural Strength ASTM C203 psi, min. 55
    Light Reflectance, Visual Light Spectrophotometer - % 65

    1 Vertical compressive strength is measured at 10 percent deformation or at yield, whichever occurs first

     
     
     

    Available sizes

    U.S.

    Thickness (in) R-Value Board Size (ft) Edge Treatment
    0.5 3.3 4 x 8, 4 x 12 Square Edge
    .75 5.0 4 x 8, 4 x 12 Square Edge
    1.0 6.5 4 x 8, 4 x 12 Square Edge
    1.55 9.8 4 x 8, 4 x 12 Square Edge, Shiplap
    2.0 13.0 4 x 8, 4 x 12 Square Edge, Shiplap