DuPont™ Weathermate™ Plus Housewrap

Non-Woven, Non-Perforated Housewrap for Maximum Weather Defense

weathermate-plus-housewrap-product-logo-image1.jpg
weathermate-plus-housewrap-product-logo-image2.jpg
weathermate-plus-housewrap-product-logo-image3.jpg

DuPont™ Weathermate™ Plus Housewrap

Non-Woven, Non-Perforated Housewrap for Maximum Weather Defense

<br><b>DuPont™ Weathermate™ Plus Housewrap</b> is a non-woven, non-perforated polyolefin-based wrap designed for enhanced job-site durability and long-term product performance for builders who want superior protection against the elements. It is specially engineered to maximize a home’s weather defense between the cladding and wall assembly, helping to ensure years of comfort for homeowners. <br><br> <b>Weathermate™ Plus Housewrap</b> forms a continuous protective membrane that defends walls from damaging bulk water and air infiltration, safeguarding against costly energy loss. It reduces drafts – increasing home comfort – and features superior water resistance to reduce the potential for water infiltration that may lead to mold and water damage of underlying water-sensitive wood sheathing. The engineered water vapor permeability of <b>Weathermate™ Plus Housewrap</b> enables water vapor behind the housewrap to escape to the exterior, thereby helping the wall dry from the inside out.
 
 
 
 
 
 

Features & Benefits 

 
 
 
 
 
 

Specifications

 
 
 

Standard Sizes

Unit Width Length Units per Case
Roll 3 ft. 100 ft. 54
Roll 5 ft. 100 ft. 54
Roll 9 ft. 150 ft. 48
Roll 9 ft. 100 ft. 54
Roll 10 ft. 100 ft. 54
Roll 10 ft. 150 ft. 48
 
 
 

Testing

<b>Weathermate™ Plus Housewrap™</b> exhibits the properties and characteristics indicated in the table below when tested as represented. Review all instructions and (Material) Safety Data Sheet ((M)SDS) before use. Please contact your local DuPont™ Tyvek Specialist before writing specifications around this product. Product properties are as follows:

TEST METHOD TEST TITLE PROPERTY RESULTS
AIR
ASTM E2178 Standard Test Method for Determining Air Leakage Rate and Calculation of Air Permeance of Building Materials Air Permeance 0.02 max. L/s-m2
TAPPI T460 Air resistance of paper (Gurley method) Air Penetration Resistance 1800 min.
sec/100cc
FIRE
ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials Surface Burning Characteristics Class A Index Flame Spread < 25
Smoke Developed <450
STRENGTH
ASTM D5587 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure Tear Strength - Machine Direction Tear Strength - Cross Direction 13 min. lbs.
13 min. lbs.
ASTM D5034 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) Grab Breaking Force - Machine Direction
Grab Breaking Force - Cross Direction
40 min. lbs./in.
35 min. lbs./in.
WATER
AATCC 127 Test Method for Water Resistance: Hydrostatic Pressure Water Resistance (at 55 cm water pressure) >5 hrs with no leakage
ASTM E96 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials Water Vapor Transmission Method A >5 perms
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

FAQ

How long can DuPont™ Weathermate™ Plus Housewrap be left exposed before covering?
Weathermate™ Plus Housewrap should not be left uncovered for more than 120 days (60 days in Canada).
Where can I get safety data sheets (SDS) for DuPont™ Weathermate™ Plus Housewrap?
This product is globally defined as articles, which does not require a Safety Data Sheets according to chemical laws in the following:
United States Canada European Union (EU) and other Europe/Middle East/African (EMEA) countries Asia Pacific countries (including Australia, China, Japan, South Korea, Thailand, etc.)
The products listed do not release or otherwise result in exposure to a hazardous chemical under the intended conditions of use and meet all other listed requirements of an article. Therefore, these products meet the global definitions of articles which do not require SDS creation or distribution.
What is the R-Value of DuPont™ Weathermate™ Plus Housewrap?
Being a very thin material (as compared to insulation boards), DuPont™ Weathermate™ Plus Housewrap, like all other housewraps, do not contribute to the R-Value of a wall system. DuPont™ Weathermate™ Plus Housewrap saves energy by reducing the amount of air infiltration that occurs through the wall. This energy savings is sometimes compared to the savings generated by an insulation of appropriate R-value. But housewraps in and of themselves have essentially no R-Value.
How thick is DuPont™ Weathermate™ Plus Housewrap?
Weathermate™ Plus Housewrap is 18 mils thick.
Can DuPont™ Weathermate™ Plus Housewrap be used in place of roofing felt paper on a residential sloped roof with shingles?
DuPont does NOT recommend the use of Weathermate™ Plus Housewrap in this application. It is to be used in residential or commercial wall applications ONLY.
Is taping of the seams of DuPont™ Weathermate™ Plus Housewrap required?
Yes. Overlap the vertical seams at least 6' and seal with tape. Overlap all horizontal seams at least 2' shingle fashion and seal with tape (the higher piece on the wall should lap over the lower piece). Tape should be contractor grade similar to Weathermate™ Construction Tape. Ensure tape is properly applied to seams to create a weather-tight seam. For detailed instructions: Housewrap/Building Wrap
Can I still qualify for the Product and Labor warranty for Weathermate™ Plus if I use DuPont Self-Adhered Flashing Products?
Yes, DuPont Self-Adhered Flashing Products* can be used with Weathermate™ Plus to qualify the housewrap for the DuPont Building Envelope Solutions Products 10-Year Limited Warranty for DuPont™ Weathermate™ Products. DuPont Self-Adhered Flashing Products* are covered under the DuPont Building Envelope Solutions Products 10-Year Limited Warranty for Single-Family, Wood-Framed Multi-Family, and Light Commercial Buildings. See the respective warranty documents for details and conditions. *DuPont Self-Adhered Flashing Products:
DuPont™ Flashing Tape DuPont™ StraightFlash™ DuPont™ FlexWrap™ DuPont™ FlexWrap™ EZ DuPont™ VersaFlange™
What type of fasteners should be used to install DuPont™ Weathermate™ Plus Housewrap?
Plastic cap nails are appropriate fasteners for DuPont™ Weathermate™ Plus Housewrap. There are pneumatic nailers for plastic cap nails that make fastening fast and secure. Plastic cap nails should be spaced about 16 inches in each direction. Staples with minimum 1-inch crown may also be used when spaced about 12 inches in each direction.
Tack hammers with 1/2' crown staples may be acceptable when installing our DuPont™ Weathermate™ Plus Housewrap. However, 1' crown staples is the best practice. When ½' crown staples are used, placing more staples than the recommended 12 inch in each direction is highly recommended.
All fasteners should penetrate at least 1/2 inch into the nail base.
Can DuPont™ Weathermate™ Plus Housewrap be installed over wet substrates?
No. DuPont™ Weathermate™ Plus Housewrap should not be installed over visibly wet substrates.
Substrates should be visibly dry before installing DuPont™ Weathermate™ Plus Housewrap. Wood based products within a wall assembly should be dried below 20% moisture content prior to enclosing the assembly on both sides.
Do I need to replace DuPont™ Weathermate™ Plus Housewrap if I’m replacing siding?
Yes. If siding is being replaced, there would be penetrations from previously installed siding, and we recommend installing new Weathermate™ Plus with the new siding.
 
 
 
 
 
 

How can we help you?