Commercial | Residential | Multifamily | Wall
Two sides of an insulation solution
Heavy-duty jobs require heavy-duty foam. Froth-Pak™ Spray Foam Insulation is the all-in-one self-contained and easily portable kit for professional contractors to fill larger gaps and penetrations quickly and efficiently. This heavy-duty, two-component foam seals out moisture, dust, allergens, and pests while improving energy efficiency, and our newly reformulated product delivers a GWP reduction of over 99%. Our new Froth-Pak™ Insulation Spray Foam contains no ozone-depleting chemicals or HFCs while elevating the performance attributes you have come to expect.
Froth-Pak™ Foam Insulation
Froth-Pak™ Insulation Spray Foam is a Class A Fire Rated two-component, quick-cure polyurethane foam that fills cavities, penetrations and cracks in rim joists, roof wall junctures and around pipes and ducts up to 2” thick.
Physical Properties
| Method | Unit | Value | |
|---|---|---|---|
| R-value per in., min<sup>1</sup> | C518 | - | 6.6 |
| Compressive Strength, min.<sup>3</sup> | D1621 | lb/in2 , parallel | 172 |
| Flexural Strength, min.<sup></sup> | - (ASTM-2) | - | |
| Water Absorption, max.<sup></sup> | D2126 | % by volume | 3.2 |
| Water Vapor Permeance, max.<sup></sup> | E96 | perm @ 1” thick perm @ 2” thick | 3.2 |
| Dimensional Stability, max<sup></sup> | D2126 | % volume change 100°F/97% RH @ 1wk 158°F/97% RH @ 1wk -40°F/amb RH @ 1wk 158°F/amb RH @ 1wk | 3.1 |
| Coefficient of Linear Thermal Expansion (PPSH-49)<sup></sup> | - (ASTM-2) | - | |
| Complies with ASTM C 578<sup></sup> | - (ASTM-2) | - | |
| Maximum Use Temperature<sup></sup> | - (ASTM-2) | °F | 240 |
| Flame Spread<sup></sup> | E84 | - | 25 |
| Smoke Developed<sup>2</sup> | UL 723 | - | 165 |
1Tested at 2” thickness, full coverage.This numerical flame spread rating is not intended to reflect hazards presented by this or any other material under actual fire conditions
2This numerical flame spread rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
3R means resistance to heat flow. The higher the R-value, the greater the insulating power. * These properties are typical but do not constitute specifications
Available Sizes
| Packaging | Dispensing method |
|---|---|
| Each | GHA |
| Each | GHA |
| Each | GHA |
Technical resources
✕
✕
To access secured content from DuPont Please Sign In or Sign Up below
How-to videos
✕
✕
To access secured content from DuPont Please Sign In or Sign Up below
Related products
Follow DuPont PBS
Follow Tyvek® Construction
© 2022 DuPont de Nemours, Inc. All rights reserved. DuPont™, the DuPont Oval Logo, and all products, unless otherwise noted, denoted with ™, ℠ or ® are trademarks, service marks or registered trademarks of affiliates of DuPont de Nemours, Inc.