Froth-Pak™ Foam Sealant

 
 
 
Commercial | Residential | Multifamily | Wall

Designed to seal out dust, pests, moisture and more

Convenient to use and quick to cure, DuPont™ Froth-Pak™ Foam Sealant is a polyurethane foam that’s ideal for filling gaps less than four-inches wide in places such as wall cavities, rim joists, and roof/wall junctures.

 
 
 

Froth-Pak™ Foam Sealant

Froth-Pak™ Foam Sealant is a two-component, quick-cure polyurethane foam that fills cavities, penetrations and cracks. It provides a continuous barrier against air infiltration and helps seal out moisture, dust, pests and smoke. Primarily used to seal gaps less than 4" wide.

 
 
 

Features & benefits

Decrease load on HVAC system
  • Improve indoor air quality
  • Minimize carbon footprint
  • Reduces energy consumption
  • Limits drafts and heat loss
  • Lower heating bills
  •  
     
     

    Physical Properties

      Method Unit Value
    Flame Spread / Smoke Developed<sup>1</sup> ASTM E84 - ≤25
    Flame Spread / Smoke Developed<sup></sup> UL 723 - ≤450
    Nominal Density<sup>2</sup> ASTM D1622 lb/ft2 1.75
    Thermal Resistance<sup></sup> ASTM C518 ft2•h•°F/Btu. R-value, min. 6.6
    Water Vapor Permeance<sup></sup> ASTM E96 @ 1 in. 3.13
    Water Absorption<sup></sup> ASTM D2842 % by volume 5.44
    Air Permeability<sup></sup> ASTM E283 @ 0.5” thick, ft3 /min•ft2 @ 75 Pa 0
    ASTM E2178 @ 1” thick, l/min @ 75 Pa 0
    Dimensional Stability<sup></sup> -40°F/amb RH @ 2 wks - 0.36
    -40°F/amb RH @ 2 wks - 0.36
    -40°F/amb RH @ 2 wks - 0.36
    -40°F/amb RH @ 2 wks - 0.36
    ASTM D2126 % volume change
    Compressive Strength<sup></sup> ASTM D1621 lb/in2 , parallel 23.4
    Flexural Strength<sup></sup> ASTM C203 lb/in2 , parallel 22.7
    Tensile Strength<sup></sup> ASTM 1623 lb/in2 , parallel 36
    Shear Strength<sup></sup> ASTM C273 lb/in2 , parallel 12.7
    Maximum Service Temperature<sup></sup> - °F 240

    1This numerical flame spread rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.

    2 R means resistance to heat flow. The higher the R-value, the greater the insulating power.

     
     
     

    Available Sizes

    Width Length Packaging Dispensing method
    0 0 Each GHA
    Each GHA
    Each GHA
    Each GHA
    Each GHA
    Each GHA
     
     
     
     
     
     
     
     
     

    Technical resources

    To access secured content from DuPont Please Sign In or Sign Up below
     
     
     
     
     
     
     
     
     

    How-to videos

    To access secured content from DuPont Please Sign In or Sign Up below
     
     
     
     
     
     
     
     
     

    Information & ideas

    6 qualities to look for in an effective home improvement contractor
    Read more
    Better building codes steel our cities against climate impacts
    Read more
    Custom Commercial Building Envelope Design Assistance from DuPont
    Read more
    Energy Efficient Homes | DuPont™ Tyvek®
    Read more
    Smart Building Design for Offices
    Read more
     
     
     
     
     
     
     
     
     

    Related products

     
     
     
    Spray Polyurethane Foam
    Froth-Pak™ Foam Insulation
    View
    Spray Polyurethane Foam
    Insta Stik™ Quik Set
    View
    Spray Polyurethane Foam
    Tile Bond™
    View