A: It’s a spray-on product that forms a long-lasting adhesive and elastic membrane on a wall assembly that controls airflow through the walls, holds out bulk water, and allows interior moisture vapor to escape, helping meet the latest building and energy codes and standards. DuPont™ Tyvek® Fluid Applied WB+™ uses advanced STPE (silyl-terminated polyether) technology, a polymer that offers several inherent advantages over older, typical acrylic and bitumen-based fluid applied air and water barrier products.
A: Yes. DuPont™ Tyvek® Fluid Applied WB+™ is easily applied using standard, everyday spray equipment. No special high PSI spraying is required. A single 25 mil coating is recommended which offers 2 to 3 times the average of competitive products.
A: DuPont™ Tyvek® Fluid Applied WB+™ supports long open times, up to 90 minutes, for safe, no rush or waste application. The unique spout attachment reduces waste and allows for faster cleanup, saving both time and money. The product also offers low shrinkage during curing, superior elongation and recovery, nine months of UV resistance, and will not wash off the wall when exposed to liquid water (even before curing).
A: Yes. Many multifamily projects require a combination of wrap and fluid applied products to meet code and budget goals. The DuPont™ Tyvek® family of commercial products includes DuPont™ Tyvek® CommercialWrap®, DuPont™ Tyvek® Flashing and Joint Compound+, and DuPont™ Sealant for Tyvek® Fluid Applied System for single-vendor/single-warranty peace of mind.
Expert On-Demand Design and Field Support for Project Success The DuPont™ Tyvek® Specialist Network is an elite team of more than 165 highly-trained field representatives that is at your service with the design and on-site consulting you need to ensure project success. Expect your DuPont™ Tyvek® Specialist Network member to assist early in the design phase with guidance on product specification. Team members are available to go on-site at the pre-job meeting to consult on scheduling, review a DuPont Building Envelope Solutions wall mock-up, and offer any contractor training that may be required. Throughout the warranty process, project site visits are documented and become part of the warranty submittal package, helping protect the project investment.